← ClaudeAtlas

breadboard-pictureslisted

Draw step-by-step breadboard build pictures with real part drawings from the Fritzing parts library, placed in named holes. Use when someone needs to be shown what to plug where on a breadboard — build guides, wiring steps, "which hole does this go in".
TheJackFace/breadboard-pictures · ★ 0 · Code & Development · score 67
Install: claude install-skill TheJackFace/breadboard-pictures
A **breadboard picture** shows one physical action: the part being placed in full colour with its holes circled and named, and everything already on the board greyed out. A build guide is a sequence of these, one action per picture. Everything runs locally from this skill's folder (`<skill>` below): - `scripts/fritzing.mjs`: finds parts in the Fritzing parts library (about 2,100 parts, cached in `~/.cache/fritzing-parts`) and bundles their drawings into the project. It needs `git` and Node 18 or newer. - `assets/breadboard.js`: the renderer, which the page loads. - `scripts/snap.mjs`: screenshots the page with headless Chrome, Edge or Chromium, and reports any problems the renderer found. - `assets/template.html`: a starting page. Read [REFERENCE.md](REFERENCE.md) before writing part specs. It defines hole names, every part option, and the generated parts (`@wire`, `@dip`). ## Steps 1. **Pin down the physical board.** Get these from the person, or from a photo: - the board size (half 30 columns, full 60–63, mini); - which letter is printed on the top row; - which rail is + and which is −, top and bottom. The Fritzing drawing's lettering can differ from the real board's, so the real board decides, through `rows` and `rails` in `BB.board()`. *Done when* all three are known, or recorded on the page as "to be checked" with a warning box. 2. **Find every part.** - Run `node <skill>/scripts/fritzing.mjs search <words>`, then `show <fzp>` for eac