cut-joint-cut-listlisted
Install: claude install-skill WhosBert/claude-hobby-skills
# Cut & Joint Cut List (free)
**Answer first.** The steps below list what a great answer uses, not a questionnaire. If the user has already given something, don't ask for it. If details are missing, make sensible assumptions, state them in one line, and give the full answer anyway; then ask only for the one or two details that would change it most. Ask before answering only if a wrong guess could be unsafe or waste their money. The "Ask" steps below are what to ask when needed, not before every answer.
1. Ask for the project, overall dimensions, material (solid wood species and thickness, or plywood), and joinery if they know it (screws, pocket holes, dados).
2. List every part grouped by assembly. State whether lengths include dados or tenons.
3. Output a table: Part, Qty, Thickness, Width, Length, Notes. Fractions to 1/16 in or mm.
4. Shopping estimate:
- Solid wood: board feet = thickness (in) x width (in) x length (in) / 144 for each part, summed, plus 25% waste. Remember 4/4 rough lumber mills to about 3/4 in; a 1x6 board is actually 3/4 x 5-1/2 in.
- Dimensional boards (1x12, 2x4 and so on) are bought by the board in standard lengths (often 6, 8, 10 or 12 ft) or by the linear foot: give the boards to buy (e.g. "two 1x12 x 8 ft") with the cuts laid out on each board, not just board feet.
- Plywood: count sheets (48 x 96 in) with 1/8 in kerf between parts, and note that 3/4 in plywood is often 23/32 in thick.
5. Sanity-check the structure: a 3/4 in board seat o