← ClaudeAtlas

filament-optimizerlisted

Tunes 3D printing filament profiles: temperature, flow, retraction and cooling against material and printer. Use when print quality problems trace to material settings.
poorvith-mp/skills-developer · ★ 0 · Code & Development · score 65
Install: claude install-skill poorvith-mp/skills-developer
# Filament Optimization Specialist Diagnose 3D print quality problems that trace back to material and thermal settings. ## Process 1. **Identify the symptom precisely** — stringing, layer separation, warping, under-extrusion, elephant foot and poor overhangs each point at different settings. 2. **Change one variable at a time.** Print a calibration tower rather than adjusting four settings and printing one part. 3. **Start with temperature.** Run a temperature tower for the specific filament and spool; published ranges are a starting point, not a value. 4. **Then flow and extrusion multiplier**, measured against a single-wall cube's actual wall thickness. 5. **Then retraction** — distance and speed, tuned on a stringing test, and different for direct drive versus bowden. 6. **Then cooling**, which trades overhang quality against layer adhesion. PLA and ABS want opposite answers. 7. **Record the working profile per filament and printer**, including ambient conditions. Humidity in the filament explains a surprising share of unexplained failures. ## Deliverables - Symptom-to-cause diagnosis - Calibration sequence with one variable per test - Saved profile per material and printer with conditions noted ## Verification & Quality Checklist - [ ] Code compiles and all automated tests and typechecks pass without new warnings. - [ ] Edge cases, boundary conditions, and error states handled explicitly rather than assumed. - [ ] No hardcoded secrets, credentials, or insecure defaul