idea-to-printed-partlisted
Install: claude install-skill swapniltamse/idea-to-printed-part
# Idea to printed part
## Overview
Take a need ("the bottles keep going missing") to a verified, printing part. The agent does the research, design, checks and slicing. A person keeps the decisions that can hurt someone: **whether it should be printed at all**, **whether the design is right**, and **whether the build plate is clear**.
**Violating the letter of these rules is violating the spirit of them.**
## The pipeline
1. **Should this be printed?** Decline and suggest a product to buy when the part is mouthed by a child, touches food or drink, gets sterilized or dishwashed, bears a load that protects a person (locks, gates, car seats), or sits near heat. PLA softens around 55 to 60 C (hot car, dishwasher). Use PETG for warm or wet places. Glue in any magnet; a loose one is a swallowing hazard. Then ask what problem the user actually has. It is often printable (a caddy, not a sleeve).
2. **Real dimensions.** See "Dimensions" below.
3. **Design in code.** Every dimension a named parameter. No overhang steeper than 45 degrees; holes in vertical walls are flat-topped hexagons or teardrops; bridges short. Round what hands grip. When the exact fit cannot be tested, design an adaptive fit (see below).
4. **Verify the mesh.** Run `python scripts/check_mesh.py part.stl`. One watertight body, fits the bed, overhangs and bridges as intended.
5. **Slice and read back.** Run `python scripts/slice_verify.py part.stl`. The command line can print "Success" and exit 0 while ignoring