check-hardwarelisted
Install: claude install-skill ubik-dsh/deepseek-harness-skills
# Reading a machine
One rule carries this whole skill:
> **A missing reading is not a good reading.**
A disk that reports `Healthy` may be a disk that reports nothing at all — `Get-PhysicalDisk` has
a health field, and a controller that does not answer leaves it at its default rather than
raising an error. A temperature query returns nothing on most machines because the firmware does
not expose one, and "no temperature" reads like "temperature fine" to anyone skimming. **Every
tool in this area fails by returning nothing, and nothing looks like good news.**
So the collector in this skill reports what it read **and what it could not**, and the second
list is the one to look at.
---
## Step 0 — read before you touch
Diagnosis is read-only. The first pass takes every measurement it can and changes nothing: no
driver updates, no `chkdsk /f`, no firmware flash, no BIOS setting toggle. Those come after a
hypothesis, and a hypothesis needs evidence.
The reason is not caution in general. It is that **the cheap repair destroys the evidence for
the expensive fault**: running a repair on a failing drive overwrites the sectors that would
have shown why, and reflashing firmware erases what the old version was doing.
**And a machine with an unclear fault should be left running until it is read**, not rebooted.
A reboot clears the event log entries and the memory state that the fault was in.
## Step 1 — take the readings
```bash
python scripts/collect.py # everythi