lint-and-fixlisted

# Lint-and-Fix ## Purpose An autonomous loop to format the codebase, run linters, and fix any remaining violations until the project passes format and lint checks. ## Loop Logic 1. **Format**: Run `make format` (trunk fmt). 2. **Identify**: Run `make lint` to list current failures. 3. **Analyze**: Read the linter output and the affected code. 4. **Fix**: Apply the minimum necessary change to resolve each issue. 5. **Verify**: Re-run `make format` and `make lint`. - If both pass: Done. - If failures remain: Repeat from step 2 (or move to the next issue). ## Termination Criteria - No failures from `make lint` after fixes. - Optional: Cap iterations (e.g. 5) to avoid unbounded loops. ## Reference Format and lint commands are defined in the project Makefile: `make format` runs `trunk fmt -a`; `make lint` runs `trunk check -a -y`.