HuMoran
UserPersonal Claude Code skill collection — Keysight + RIGOL oscilloscope driver, more to come
Categories
Indexed Skills (5)
converting-easyeda-pro-to-kicad
Use when converting a 嘉立创EDA专业版 / EasyEDA Pro / JLCEDA project (.eprj2 / .epro / .epro2) to KiCad, when an imported EasyEDA project fails ERC/DRC/schematic parity (pin_not_driven flood, net_conflict $1Nxxxx, footprint_link_issues), when its 3D view shows no components (missing EASYEDA_MODELS/*.step), or when making an imported project iteration-ready (zone refill causes unconnected pads / starved_thermal, field sync direction unclear, empty footprint Value never matches parity, off-grid pins)
creo-jlink
Run automation inside PTC Creo Parametric via J-Link (the Java API) — batch STEP/BOM/drawing export, mass properties. Use for Creo 自动化 / 二次开发 / 批量导出, otk.jar, protk.dat, parametric.bat, pfcSession, or when Creo starts up fine but a J-Link app silently never runs.
creo-remote
Drive Creo on a remote Windows box from macOS/Linux over SSH — push the app, compile, launch into the interactive session, poll for completion, free the license seat. Use for 远程跑 Creo / 远程导出, SSH 到 Windows 跑 CAD, schtasks /it, WSL interop, or when starting Creo over SSH fails with no GUI context.
oscilloscope
Drive a benchtop oscilloscope via VISA / USBTMC for hardware bring-up and waveform verification. Supports two scopes auto-detected at connect time — Keysight / Agilent InfiniiVision DSO5000-series (tested DSO5012A) and RIGOL DS1000Z-series (tested DS1102Z-E). Use this skill ANY time the user mentions the scope, oscilloscope, 示波器, DSO5012A, DS1102Z-E, DS1000Z, capturing waveforms, taking screenshots from the scope, CSV waveform data, SCPI commands, trigger setup, or pre/post-bridge measurements. Also use when the user reports problems like "trace is missing", "trigger isn't firing", "波形抓不到", or wants to verify firmware output on hardware. Self-contained — bundles the helper script and a venv bootstrap so it works without `~/Work/scope/` being set up. Knows the project-specific quirks (×100 probe lock on Keysight, BMP-not-PNG on Keysight, channel-display footgun, AUTO-SCALE override, RIGOL USBTMC pipe-stall recovery, RIGOL binary-block settle delay).
rs485-modbus
Drive a USB-to-RS485 dongle as a Modbus RTU master via the bundled `modbus.py` helper for firmware bring-up, register dump, and protocol-level debugging. Use this skill ANY time the user mentions RS485, Modbus, Modbus RTU, holding/input registers, function codes (FC=03/04/06/10), CRC errors, "波特率", "从机地址", "寄存器", USB-RS485 adapter (FT232/CH340/CP210x), or wants to ping/read/write a Modbus slave from the Mac. Also use when the user says things like "测试 Modbus 通信", "读一下版本号", "发个起始命令", "the slave isn't responding", or is debugging a STM32/embedded firmware that exposes a Modbus interface. Self-contained — bundles the helper script + venv bootstrap; no external Modbus tooling required. Knows the emst-core preset (port `/dev/cu.usbserial-A50285BI`, slave 1, 115200 8N1, register map for VERSION/CMD/LEVEL/STATE).
Bio shown is the top-scored skill's repo description as a fallback — real GitHub bios land in a future update.